Pipe tapping tees stainless

Stainless Steel Tapping Sleeves

Stainless Steel Tapping Clamps data Sheet

SST Model


Stainless steel tapping Sleeves (hot) taps on several pipe types for water, gas and petrochemical fluids

The SST is a reinforced split boltable double band clamp with a flanged connection outlet.

The upper body is reinforced to accomodate the installation of valves and drilling equipment.

The SST tapping sleeve is designed for live placement drilling (hot taps).


Available sizes:
Tapping tee clamps for pipe diameters from DN 80 up to DN 800. Standard length: 500 mm.

Other lengths are available.
Inventory reduction:
The built-in OD range of 20 mm allows one sleeve to fit various classes of steel, PVC, ductile iron, cast iron or asbestos-cement pipe.

Easy installation:
No specially trained personnel or tools needed. A wrench to tighten bolts is the only tool required to install the sleeve.

Full circumferential seal:
Allows you to tap size on size with confidence. No more need for heavy, hard to assemble, cast iron sleeves.
Stainless steel AISI 304 or 316 L.
Light weight:
The high tensile strength of stainless steel allows us to manufacture the lightest tapping sleeve in the industry. Easy to handle and less load on the pipe.
Reinforces pipe:
Full circle design reduces stress on the pipe opposite of the tap.

Threaded Connections Stainless Steel Tapping Clamps


Threaded connection tees stainless steel tapping clamps are used to make permanent (hot) taps on different pipe types. For water, gas and petrochemical fluid applications.


Threaded Tapping repair clamps can be equipped with a threaded outlet up to 4". The standard outlets are threaded according to ISO/ DIN or BSP. American CC or IP threads are available as well.

Data Sheet

The clamps can be used to repair the following pipe types:

  • Ductile Iron (DI)
  • Cast Iron (CI)
  • Steel (St.)
  • Asbestos Cement (AC)
    PE coated steel
  • PVC, GRP, PE

Material specification:
All metal parts: stainless steel AISI 304 or AISI 316L.
Sockets and nipples are threaded according to ISO 7/DIN or BSP. Special designed outlets are available on request.
The outlets are 100 % air tested after welding.
Metal parts have been deburred and are passivated to restore the corrosion resistance to its original state after the welding process.
Single band (one section) or double band (two sections). For detailed working ranges please see our price-list.
Standard certified rubber gaskets EPDM or NBR. The rubber is tapered and has a waffle pattern.
Seamless rubber lining for every clamp diameter.
Bridge plate is vulcanized into the rubber gasket.
U-shaped lifter bars.
Stainless steel, electrolytic zinc plated nuts to prevent galling.
Stainless steel washers.
No loose parts that may get lost during installation.
No special tools required: a simple wrench will do the job.
Special tape is used to fix the rubber gasket to the stainless steel band. This tape is flexible and reinforced with glassfibre thread to withstand hot and humid conditions and guarantee a long storage capability.
Under most circumstances the clamps can be installed without releasing the pressure on the pipe.

Available sizes:
FS 10 tapping clamps are available from range 38-42. Available lengths: 150 / 200 / 250 / 300 / 400 / 500 / 600 mm. 
FS 20 tapping clamps are available from ranges 88-110. Available lengths: 200 / 250 / 300 / 400 / 500 / 600 mm. 

Pressure ratings:
Pressure ratings for water ** depend on the type of break or damage, pipe OD, medium etc. 
Pipe DN 40 up to and including DN 150: 16 bar

Pipe DN 175 up to and including DN 300: 10 bar

Contact us: Westatlantic Tech Corp., 902 455 4455

Back to Home Page


  USA Canada: Threaded Pipe tapping Sleeves. USA: Texas, TX, Houston, New York, NY, Illinois, IL, North Dakota, ND, Iowa, IA, Ohio, OH, Michigan, New York, NY, Utah, Arkansas, Kentucky, KC, California, CA, Colorado, Denver, Louisiana, LA, Florida, FL., Pennsylvania, PA. Wisconsin, WI. Canada, Ontario, Oakville, Toronto, London, Hamilton, Mississauga. Alberta, AB; Edmonton, Fort McMurray Calgary. British Colombia, BC; Kelowna, Vancouver, Prince Rupert, Kitimat. Saskatchewan, SK; Regina, Saskatoon, Prince Albert, Estevan, Swift Current. Manitoba MB; Winnipeg, Thompson. Quebec, QC; Montreal, Quebec City, Trois-Rieviers, Chebougamau, Sherbrooke. QC, Alberta, Saskatchewan, Manitoba, Quebec, New Brunswick, NS, Newfoundland. ROMACON, UNI Coupling, United Pipeline Products, Romacon Petro, Hegawa, Gekave.